Build a New Walkway
Jim Baskin - South Yarmouth, MA

Hardwarian Jim Baskin

True Value Hardware

South Yarmouth, MA

Build a New Walkway

Level: Experienced

Is your lawn taking a beating from lots of back and forth traffic in your garden? If you thought your only option was a "Keep off the Grass" sign, we've got good news. You can protect your grass – and add a touch of beauty and charm – by building an inexpensive concrete walkway that looks just like brick or cobblestone.

Share this project
Print
Project Steps
Project Shopping List
    • Step 1: Where It's At - Locating Your New Walk
       

      Luckily, you don't have to be a mason or even an experienced do-it-yourselfer to get great concrete results - all it takes are 2' x 2' reusable plastic Quikrete® Walk Makers® molds and the right building materials…plus the desire to forge a new path.

      First things first - where do you want your new walkway to go? Pick a likely spot, then get a good idea of how it will look by using visual aids - stakes and string for a straight path, or several garden hoses or rope lengths for one that's curved. Once you've decided on a layout, remove any sod within its boundaries, along with about an inch of soil (you'll use both to fill in the gaps around the walk when you're all done, see Step 9, you'll achieve more professional results).

      Helpful Tip

      It's important to keep displaced sod and soil healthy, so keep it freshly watered and store in a cool place.

    • Step 2: Get into Position - Place Your Mold
       

      Place the plastic Quikrete® Walk Maker® mold next to any fixed starting point - good choices include the edge of your patio or the entrance of your house. Once the mold is in place, use a 2-foot spirit level to make sure it's level from side to side and from end to end.

      Helpful Tips

      Quikrete® Walk Maker® patterns available at True Value are, Brick (item #591373) and Country Stone (item #591357).

      For grade-A grading of your chosen site, either follow the existing grade or use your level to create one you like better.

    • Step 3: Make Like a Concrete Mixer
       

      But don't stop there - unleash your inner artisan by adding color and surface texture to your mix. Here's how:

      • It's easy to add color to any Quikrete® Walk Maker® project - that's what Quikrete's® Liquid Cement Color is for. Pick a hue that moves you, and figure on ten ounces of liquid color for every two 60 or 80 lb. bags of concrete mix.
      • To get downright colorful combine ten ounces of color with 1-1/4 gallons of clean water for every 10 ounces of color. If you're using a mechanical mixer, add both liquids to the mixer and then add the concrete mix. If you're mixing by hand in a tub or wheelbarrow, combine the color and water first, then add the mixture to the concrete mix.
      Safety Alert!

      Whenever you're working with cement powder, always wear a dust mask. Freshly-mixed cement can cause severe burns, so always wear goggles, rubber boots and rubber gloves and avoid contact with your skin and eyes. If you get any wet cement on your skin (either through direct contact or wet clothing), wash the area well with fresh water and remove your soaked clothing immediately. Always keep all of your materials and equipment away from children and pets.

    • Step 4: Fill 'Er Up - Fill the Form
       
      make a shovel with concrete in spade

      Shovel the concrete onto the form and spread it to fill each cavity. The concrete should be level with the top of the mold.

      Helpful Tip

      Wet the mold with water before adding concrete - it will help prevent a sticky situation when it's time to remove it.

    • Step 5: Get Even - Even the Surface
       
      make a smothing over the concrete

      With a mason's float (or even a block of wood), scrape off excess concrete and smooth the surface - a swirling motion works best. This is more than just a cosmetic procedure - it also floats any fine particles to the surface, creating a denser, more durable top layer.

    • Step 6: Mold Removal
       

      Remove the form after about five or ten minutes. Before you get ready for the next section, take a moment to admire your handiwork - you've just created the illusion of real brick or stones. Enhance the visual hocus-pocus by touching up and detailing the edges with a mason's trowel.

    • Step 7: Second Verse, Same as the First - Reposition the Form
       

      Ready to do it again? Place the form adjacent to the concrete you just completed, and repeat Steps 4, 5, and 6. Use a trowel to blend and eliminate cut lines between each section.

      Helpful Tips

      Need to come around a curve or turn at an angle? Just butt the outside corner of the mold to the walkway you've already created and bend it to align with the curve. The mold will overlap the existing concrete along its inside curve.

      To create a curved edge, use a trowel to slice through the concrete along the desired line and push the extra concrete off to the side. Repeat the process until you complete the whole walkway.

      Feeling extra creative? Create a variation in your walkway pattern by rotating the mold a quarter turn each time you reposition it.

    • Step 8: Get Cured - Cure or Seal the Concrete
       

      For long-lasting results, allow time for the concrete to cure, or harden. Since concrete loves water, keep your new walkway moist by continuously misting it with water and keeping it covered with plastic sheeting or a tarpaulin for two or three days to retard evaporation. In a rush? Just apply a chemical curing and sealing agent, such as Quikrete® Acrylic Concrete Cure & Sealer.

    • Step 9: Get Your Fill - Fill in the Walk
       

      After the concrete is completely cured, it's time to fill in the details by backfilling and replanting the excavated area around the walk with the soil and sod you removed. Then, depending on the look you want to achieve, you can either fill the joints between the ''stones'' or ''bricks'' with soil, sand or dry mortar mix (just use a broom to whisk it across the surface) or grout them with a packaged sand or mortar mix

      Helpful Tips

      If you love the look of grout - but not the extra work involved to do it - try this time-saving shortcut: instead of troweling a grout-water mixture into the joints, simply brush dry mix into the joints and mist the surface with water to dampen.

      Remember the Quikrete® Liquid Cement Color you used to tint your concrete? You can also use it to dye your grout the same or a contrasting color.

      Congratulations on building your new walkway. Now you're on the right path to a great looking landscape!

  • Here’s what you’ll need to complete this project successfully.

    Before you begin, use the shopping list below to uncheck the tools you already have to complete this project.

    Then, print or save your updated list and bring it to your local True Value hardware store, where an expert Hardwarian will give you the remaining tools and expert advice you need to complete this project.

    You can also shop online for these project items at TrueValue.com and receive FREE shipping to a participating store.

    60 character limit.
  • Alternative Mulch Landscaping Ideas

    There are a number of mulch alternatives to consider.

    Learn More

  • Top Spring Projects

     
  • How to Make Compost

    Learn how to make compost for your lawn and garden.

    Watch Video

  • Follow Us On Pinterest

    Follow Us On Pinterest

    Visit our Pinterest page for great do-it-yourself project advice and home inspiration.

    Follow Us

  • Behind Every Project Is a True Value

    Behind Every Project Is a True Value

    Get the projects and advice you need to get your projects done right.

    View Commercial