Lawn Striping
Alan Bryant - Oakhurst, CA

Hardwarian Alan Bryant

True Value Home Center

Oakhurst, CA

Lawn Striping

Level: Experienced

You keep your lawn healthy and well-manicured but you can take it to the next level by mowing stripes into your yard. If you want your grass to have the professionally trimmed look of a baseball field or golf course, follow the steps below and make your lawn the envy of the block.

Share this project
Print
Project Steps
Project Shopping List
    • Step 1: Mow Right
       
      mower

      Mowing your yard correctly is the first step to a great-looking lawn. Even if you feel you’re handy with a mower, it doesn’t hurt to brush up on your skills. Always set your mower’s blade to the correct height for your type of grass. If you’re not sure, set the blade so that you don’t cut off more than 1/3 of the grass blades’ height. Grass that is too short makes your lawn susceptible to crabgrass and damage from the sun. Cutting the grass at this height also makes it easier to bend the grass over to create the stripe effect.

      Routinely use a scraper to remove any built-up dirt and grass clippings on the underside of the mower. Rinse the underside with a garden hose. Also, check the mower blade. If the blade needs sharpening, use a heavy file to remove dull edges. You will probably only have to sharpen the blade once a year, either at the beginning or end of the mowing season.

      Safety Alert!

      Pick up debris that could be thrown from under the mower and cause damage or injury, such as rocks, sticks, trash, etc.

      You want to push your mower in parallel rows. Using a sidewalk, driveway or other non-grass surface as a guide and a starting point, begin mowing parallel to the surface and work your way across the lawn, turning at each end and mowing alongside the row you just made.

      Helpful Tip

      To ensure you don’t miss any grass, keep your mower’s wheel just inside the previously cut row.

      Use a grass bag or catcher with your mower. This leaves your lawn looking clean and neat. Remember not to let the bag become too full. When this happens, grass begins to clump and these clumps fall out from underneath the mower and leave your lawn looking messy. Empty the grass catcher when you notice that it’s almost full.

      Helpful Tips

      Clumps and grass clippings can be spread across the yard with a general purpose rake so that your lawn isn’t messy looking. It is also good for the grass, as the clippings act like mulch.

      Generally speaking, you should cut your grass once a week for appearance and good grass health.

    • Step 2: Know Your Grass
       

      The striping effect is created by light reflecting off of grass blades. Stripes look dark when they are bent towards you, while lighter stripes are created by the effect of blades bent in the opposite direction. The degree with which your lawn can be striped to look like a baseball field depends on whether, and how much, your grass blades can bend and remain bent. Cool-season grasses work best to accentuate the striped effect. These include fescues, ryes, bentgrass and bluegrass to name just a handful. Warm season grasses like Bermuda, carpetgrass, St. Augustine grass or zoysia don’t stay bent over as long because the blades are usually stiffer and tougher.

      Helpful Tip

      Water the grass after mowing to make stripes stand out even more.

    • Step 3: Choose a Pattern
       

      Before cutting and/or rolling, choose a pattern that works best for you and your yard. Creating parallel stripes is simple and probably the most common striping effect. Other potential patterns include gently curving stripes that create a wave effect, which is good for matching with curved hardscapes. You can also cut/roll in circles around circular landscaping features for a dramatic effect. A more complex pattern is a checkered or chessboard pattern common on some baseball fields.

    • Step 4: Use a Lawn Roller
       
      lawn rollerStriped Lawn

      While mowing naturally creates stripes, the effect doesn’t last long. A lawn roller accentuates the striping and helps it last longer between mowing. There are manual push lawn rollers for after mowing and also tow-behind rollers that you can attach to your riding or push mower while you are cutting. Some striping “systems” will require some installation, as you have to attach it to your mower. Follow all manufacturer’s instructions carefully.

      For simple straight stripe patterns, push the roller or mow in parallel lines like you would normally. The roller pushes down the grass in the direction in which you are mowing, creating the striped pattern. Be sure you “roll” the same direction that you mowed.

      Wave-pattern stripes can be created by first cutting/rolling adjacent to a curved hardscape feature such as a flowerbed. This will give you a shape to start with and apply across the yard. After making the first pass, simply turn and go back the opposite direction as you would with straight parallel lines but follow the wave shape of the first pass.

      Circular stripes can be created in a similar fashion. Start cutting/rolling by first making a pass directly around a circular hardscape feature. After cutting/rolling a full circle, push the mower/roller outside of the circle, turn it around and mow/roll the opposite direction in another full circle. Repeat this until you’ve cut/rolled all the grass in this pattern.

      For a checkerboard pattern, start by first cutting the outside perimeter of the space. Then cut/roll in parallel diagonal lines across the yard until you’ve mowed/rolled the entire space. Next, crisscross over those lines, cutting/rolling in parallel diagonal lines to create the distinctive checkerboard pattern.

      Helpful Tip

      Use a reel mower. The experts who stripe baseball fields make reel mowers one of their tools of choice to create the designs you see at the ball park.

      That’s it! Your lawn should look like it’s regularly maintained by pros.

  • Here’s what you’ll need to complete this project successfully.

    Before you begin, use the shopping list below to uncheck the tools you already have to complete this project.

    Then, print or save your updated list and bring it to your local True Value hardware store, where an expert Hardwarian will give you the remaining tools and expert advice you need to complete this project.

    You can also shop online for these project items at TrueValue.com and receive FREE shipping to a participating store.

    60 character limit.
  • Alternative Mulch Landscaping Ideas

    There are a number of mulch alternatives to consider.

    Learn More

  • Top Spring Projects

     
  • How to Make Compost

    Learn how to make compost for your lawn and garden.

    Watch Video

  • Follow Us On Pinterest

    Follow Us On Pinterest

    Visit our Pinterest page for great do-it-yourself project advice and home inspiration.

    Follow Us

  • Behind Every Project Is a True Value

    Behind Every Project Is a True Value

    Get the projects and advice you need to get your projects done right.

    View Commercial